The words of this notebook, in plain language.
- TDP
- Thermal design power: the heat, in watts, that the cooling system must be able to remove from a chip.
- HBM
- High-bandwidth memory: layers of DRAM stacked vertically and placed right beside the chip, joined by thousands of short wires.
- Interposer
- A thin slab of silicon under the chips that carries the fine wiring between compute dies and memory (TSMC’s version is called CoWoS).
- Chiplet
- A small die that is one piece of a larger processor. Several chiplets are assembled in one package.
- Reticle limit
- The largest area a lithography machine can print in one exposure, about 850 mm². It caps the size of a single die.
- Hybrid bonding
- Joining two dies by bonding their copper pads directly, without solder bumps. The connections are much smaller and closer together.
- FP4
- A floating-point number written with only 4 bits. Less precise, but it halves the data moved and speeds up calculation.
- Gate-all-around
- A transistor whose gate surrounds the channel on all sides, which gives better control than the older fin shape.
- Backside power
- Delivering power from the underside of the chip, so the top side is free for signal wires.
- Co-packaged optics
- Optical transceivers built into the same package as the chip, so signals leave as light after a very short electrical path.
- Thermal interface material
- The thermal paste or pad between the chip and its lid or cold plate. It fills tiny gaps so heat can pass.